The principle of operation of a pump for penis enlargement

Many men are unhappy with the parameters of their sexual organ and do not want to put up with it.Therefore, various techniques are used to make the penis thicker and longer.A device such as a penis enlargement pump is also widely used.

Principle of operation of the device

A pump is a cylindrical shaped device.The device is designed to increase the length and width of a man's penis, as well as increase erection.

The pump works according to a simple principle.When used, pressure is created around the male penis, which helps increase blood flow and fill the corpora cavernosa with blood.The same thing happens with an erection.The penis very quickly becomes hard and swells, which allows its parameters to increase.

Types of pumps and pumping

A penis enlargement pump, regardless of its type, has a unique structural principle.It's a clear bottle with centimeters on it.There are also devices with which a vacuum is created and the required pressure is maintained.

There are three types of pumps:

1. Manual.The vacuum is created using a piston or a bulb.Such devices have a lower cost and therefore are often used.However, men have to wait quite a long time to get the effects of their use.
2. Automatic.With this type of pump, the pressure in the balloon is created by an electric pump already integrated into the device.Batteries are required to operate.Automatic devices are preferable because they are very efficient and allow you to control the pressure and suction power.
3. Aquatic.The newest type of pump.The difference is that water is used instead of air.This type of enlarger is safer, more effective, has few contraindications and lasts much longer than previous models.

Pumping is carried out in two ways.The first is called packaging.Its essence is to stretch the tunic and increase the penis in length, but not in width.To do this, use a narrow bottle in which the penis will not swell to the sides, but will stretch upwards.

During exercises, safety precautions must be observed.

The second method is classic pumping.In this case, a large bottle is used in which the penis has the ability to swell in all directions.This allows you to increase the width and length of the organ.

Selection criteria

The enlarger pump is chosen taking into account the size of the penis and the purpose of its use.Experts advise the following:

1. The length of the device should be approximately 3 cm longer.
2. The width should be 2 cm greater than the diameter of the penis.
3. For beginners, it is recommended to choose the manual type of device, as it is the simplest.

The above penis sizes are only taken into account when aroused.

During the purchasing process, you should also pay attention to the materials from which the enlarger is made.The bottle must be strong enough to prevent accidental damage to the male organ.

Contraindications

Men suffering from the following pathologies are not allowed to use a vacuum enlarger:

1. Thrombosis.
2. Fibrosis.
3. Liver diseases.
4. Kidney diseases.
5. Diabetes mellitus.
6. Pathologies of the heart and blood vessels.
7. Sexually transmitted diseases.
8. Dysfunction of the urinary organs.

If a man is not sure whether he can use a pump to increase the length and width of the penis, it is worth consulting a doctor for an examination.

Advantages and disadvantages

A vacuum pump allows men not only to lengthen and expand their dignity.The device also helps improve erectile function and prolong sexual intercourse by reducing the sensitivity of the organs.In addition, the device allows you to adjust the shape of the penis, even if there is a curvature.

The negative aspects of the pump only appear when it is used incorrectly.Failure to follow the instructions leads to many unpleasant consequences.

Effect of use

If you use the pump constantly, after 6 months the penis will change size forever.To achieve maximum effect, it is recommended to simultaneously take drugs that increase the production of sex hormones in men.But this can only be done after consulting a doctor.

You should know that a pump and a penis enlargement pump are the same thing.

Those who have already tried the pump note that they were able to achieve the desired result.After six months, the length of the penis increases by 3 cm and its thickness by 2 cm.

Instructions for use

To use a vacuum pump for penis enlargement, you do not need any special skills.Before the procedure, the device must be treated with lubricant to ensure sliding.

The male penis should be lubricated with a special cream, the effect of which allows you to normalize blood flow and increase blood flow to the penis.

Then place the penis into the cylinder.Remove air from the bottle to create a vacuum environment.As soon as redness of the skin appears, you should wait 30 seconds and start the air.The procedure should take no more than 15 to 20 minutes.

Possible consequences

It is no wonder that special instructions were created for using the pump.Carrying out all manipulations strictly in accordance with it allows you to avoid harmful consequences.But sometimes men ignore the rules.

As a result, instead of the desired centimeters, we get:

1. The appearance of a swollen ring at the base of the head of the penis.This is due to stagnation of lymphatic fluid.This phenomenon can occur even if the vacuum device is used correctly.If this side effect occurs, you should stop using the device.
2. Swelling of the penis due to the influx of large amounts of lymph.
3. Deterioration of erectile function.
4. Redness of the penis, bleeding.
5. Thrombosis.The disease poses a huge threat to human life, but it is extremely rare when using a pump.

To avoid negative consequences, it is important not only to use the pump correctly.We should also not ignore the presence of contraindications to its use.If so, then you should look for other ways to enlarge the penis.

Homemade devices

For men who do not want to spend money on purchasing a factory enlarger, there is the option of making one at home with their own hands.

A cuff pump

To create an air-free environment, you must unwind the cuff pump and turn the cuff inside out.Next, you need to reassemble the device, but in reverse order.

Next, you need to make a valve designed to release excess air.For this purpose, you can use a valve from an aquarium compressor.It must be connected to the application pipe and sealed.

From the compressor

You can remove a compressor from unnecessary refrigeration equipment.After removing the evaporator and condenser, cut the pipes connecting them.After that, connect the compressor to the network.

The pump helps, but a greater effect is achieved by taking testosterone-containing drugs or using an extender at the same time as using the pump.

Obtain an air filter at any automotive store.It must be attached to the compressor opening.The filter must be connected to a rubber hose of the required size.Then all that remains is to try out how the device works.

Use a syringe

Take a plastic tube, cut it into three parts, the size of each should be 10 cm.Attach them to the tee.The result is a three-pointed T-shirt.

Attach the syringe tip to the central tap.Install valves on the side outlets made.

In this case it is important that one opens upwards and the other opens inwards.To avoid confusion in the future, you need to draw arrows that will indicate the direction of the air.

Use plastic bottles

A fairly simple pump for penis enlargement can be created from ordinary plastic bottles.It is simply important to choose different container sizes.The larger one requires cutting the top off to create a cylinder shape.

Make holes in the bottom of the second bottle and insert it into the first container.It is important that a significant gap does not form between the walls.Next, you need to connect a hose to a large container.You can take it to the bicycle tire pump.

Caring for the device

To maximize the life of your enlarger, you must take care of it properly.If the device has just been purchased and has not yet been used, then it is necessary to wash it thoroughly with soap, then dry it and treat it with an antiseptic.Additionally, the device must be washed after each use.

Do not treat the pump with hydrogen peroxide or boiling water, and do not use lubricants containing grease during the procedure.Otherwise, the risk of damage is high.

Who and when was vacuum erectile therapy offered and what is its significance?

The idea of vacuum erector therapy was introduced into the practice of modern andrology by American citizen G. Osbon, who in the early 1960s used the first vacuum erector for his own needs.Mr. Osbon himself suffered from erectile dysfunction (ED), and at the time it was thought that ED was primarily psychogenic in origin.However, psychotherapy naturally did not help Mr. Osbon, as he suffered from organic erectile dysfunction.Realizing that the erection of the penis occurs due to the flow of blood to it, the talented inventor suggested that if the penis is placed in a cylinder with a pressure lower than atmospheric pressure, blood will begin to flow into it under the influence of vacuum, which should lead to an erection.This is how the first vacuum erector was born, consisting of a cylinder and a pump connected together.In the first half of the 1970s, mass production of vacuum formers designed by G. Osbon began.In addition to the device itself, this American inventor also created a method for using it to overcome erectile dysfunction, which was later called the Osbon technique.The aim of vacuum erection therapy or Osbon technique is to achieve an erection of the penis placed in a vacuum cylinder, as well as to maintain the resulting erection using compression rings.

• 90% efficiency;
• There is no need to use medications with side effects;
• Non-aggressive treatment method;
• Helps create an erection while respecting all precautions.

Sex shops often advertise and sell vacuum pumps to increase power.How effective are they?

First of all, please be aware that worldwide, truly functional vacuum machines for medical purposes (licensed for medical use) are distributed only through doctors, medical institutions or pharmacies.This is because only a healthcare professional specially trained in the field of andrology vacuum therapy can teach the effective and safe use of a vacuum machine.Secondly, sex shops are always interested in buying cheaper systems, made mainly in China and other Asian countries, in order to get more profit from their sales.These systems are inexpensive for the following reasons:

• Cheap materials and poor quality manufacturing and assembly.
• Low-power pump, which is not capable of creating and maintaining sufficiently low pressure in the cylinder, necessary to ensure adequate blood flow to the penis and the appearance of an erection.Sometimes, instead of a pump, an ordinary rubber bulb is simply attached to a small primitive cylinder, which is not at all capable of creating a vacuum.
• Imperfect design and poor quality of compression rings.
• Short lifespan.

Naturally, no one in a sex shop is able to give you complete and truthful information about all the features of using a vacuum machine, because... This requires special education.Therefore, purchasing such a “sex-shop” vacuum erector will probably just be a waste of money for you.

How is a vacuum erector used for vacuum erection therapy using the Osbon method?

First of all, it should be understood that a vacuum erector, like all other conservative methods of treating erectile dysfunction or male impotence, does not completely cure it, but only provides the opportunity to achieve and maintain an erection necessary for sexual intercourse.

The vacuum assembly kit always includes a vacuum pump, vacuum cylinder, compression rings and water-soluble personal lubricant, instructions and/or video tape on how to use the device.Sometimes the kit is supplemented with a device for putting compression rings on the cylinder and some other devices.Using a vacuum erector to obtain and maintain an erection followed by sexual intercourse includes several steps:

Step 1. The compression ring is pre-mounted on the lubricated edge of the vacuum cylinder.The penis is also lubricated and placed inside the cylinder.Using a pump, a vacuum is created in the cylinder.It is important that air is not drawn between the edge of the cylinder and the skin.To do this, the cylinder must be pressed quite firmly against the body, and a lubricant applied to the edge of the cylinder helps seal the contact.Sometimes you should shave the skin around your penis.If necessary, the vacuum depth is adjusted with the pressure relief button on the pump.Lubricating the penis with lubricant helps it slide better inside the cylinder as it begins to tense.

Stage 2. Under the influence of vacuum, the penis fills with blood and becomes erect.When working with a vacuum pump, you need to achieve the maximum possible tension on the penis.A signal that the erection has reached its maximum is heaviness and moderate pain in the head of the penis.It should be understood that the erection obtained using a vacuum erector cannot be as complete as your own erection that you had before the development of erectile dysfunction.

Step 3. The compression ring is released from the cylinder on the base of the penis, which is held by this ring in erection.The patient can have sexual intercourse.The compression ring can stay on the penis for up to 30 minutes.

Step 4. After intercourse, the compression ring is removed and the penis returns to a calm state.

When using a vacuum erector, you should keep in mind that keeping a compression ring on the penis for more than 30 minutes can lead to circulatory problems and cause problems such as swelling and even necrosis of the penile tissue, a decrease in the sensitivity of the glans, progression of scar changes in the corpora cavernosa of the penis and worsening of erectile dysfunction.Under no circumstances should you fall asleep after sex with the compression ring not removed from the penis.

To facilitate the use of the vacuum erector and facilitate sexual intercourse, you should use the water-soluble lubricant supplied with the device.The size of the compression ring is chosen individually depending on the diameter of the penis.It is possible to put 2 compression rings at a time.

What other purposes can a vacuum former be used in andrology?

Of course, the main area of application of a vacuum erector in andrology is its use to achieve an erection and achieve sexual intercourse.This area of application will be of interest to men unable to achieve independent erections or suffering from erectile dysfunction.However, there are several other areas in which a vacuum machine can be used by both healthy men and patients suffering from various penile diseases.

1. Vacuum massage.In our country, this area of use of a vacuum fitter is called local negative pressure therapy or LNP therapy.Its idea is that periodic suction of the penis leads to stretching of the cavernous tissue, improves its blood supply, increases its elasticity and eliminates mild forms of organic erectile dysfunction, as well as preventing erectile dysfunction.Unfortunately, there is currently an insufficient amount of scientific work that statistically correctly confirms the correctness of this idea.However, we consider this area of application of a vacuum erector justified and recommend to our patients the use of a vacuum erector both to prevent erectile dysfunction and to improve the quality of their own erections.Sometimes LOD therapy is used in the complex treatment of organic erectile dysfunction, in combination with erection pills and intracavernous drug therapy.
2. Penis enlargement.According to some researchers, vacuuming the penis, by stretching the corpora cavernosa, helps increase the length and width of the penis.As in the case of vacuum massage, not all researchers agree on the advisability of using a vacuum erector to enlarge the penis.There is no generally accepted method for using a vacuum machine for this purpose.However, it is known that vacuum erectile therapy has proven itself to be an auxiliary method of penis enlargement, used in combination with surgical enlargement.
3. Straighten the penis.For congenital (intracavernous cord) or acquired (Peyronie's disease) curvatures of the penis, when its deviation from the horizontal axis does not exceed 45°, according to some researchers, it is possible to effectively use a vacuum erector to straighten the penis.
4. Overcome premature ejaculation.In the presence of premature ejaculation, the penis can be kept erect using compression rings included in the vacuum assembly kit and placed at the base of the penis after an erection.
5. Complementary erection.A vacuum erector can be used to "top off" one's own erection if it is not hard enough or to achieve better swelling of the head of the penis in patients who have undergone penile prosthesis.
6. Sexual rehabilitation program after radical prostatectomy and other radical operations for malignant tumors of the pelvic organs.

In recent years, due to the improvement in the quality of prostate cancer diagnosis, this disease is increasingly detected at an early stage, when it can with a high probability be completely cured by surgical intervention - radical prostatectomy.The disadvantage of this operation is that 20 to 100% of those operated on, depending on the technique of performing the operation and the experience of the surgeon, develop erectile dysfunction.If in the first months after the operation the patient is included in a rehabilitation program of erectile function, the chances of restoring his own erection increase significantly.This program, of which the use of a vacuum machine is an integral part, is described in detail on our website in the prevention of urological diseases section.

What does a penis look like after a vacuum pump?

Side effects:

• There is not enough hardness at the base of the penis;
• Red and purple spots appear on the skin;
• Uncomfortable feeling of erection;
• The color of the skin darkens, becomes dry and numb;
• Decreased erection for a short time;
• Pain due to a hematoma on the penis.

Clamping concept

Clamping is a method by which men can increase the thickness of their penis.This method is considered truly extreme, which is why many doctors oppose such experiments.Natural penis enlargement is achieved by creating an increase in blood pressure in the penis.

Doctors warn that this technique is not intended for beginners.The consequences can be disastrous

The procedure is carried out strictly according to the established technique.If you deviate from it, the risk of developing serious consequences increases.These include:

• Change the skin color of an organ to a dark shade.
• Numbness of the head.
• Formation of hematomas in the genital area.
• Stagnant blood processes in the tissues of the penis.
• Damage and breakage of capillaries.
• Deterioration of erection.

To avoid such complications when practicing clamping, you should first try gentler techniques, for example, jelqing, Yuli.

Preparing for therapy

Before starting the session, you must consult a specialist.Only a specialist will be able to examine the patient and identify contraindications to the use of vacuum therapy.Sometimes contraindications may be due to psychological aspects that can be easily eliminated.

Before using the pump, it should be washed with warm water and soap.It is forbidden to boil or pour boiling water over it.Additionally, the pump should not be used by more than one person.The pump is quite a fragile item and should be used with care and not thrown away.The vacuum cleaner should be stored in a dark, dry place at a temperature not higher than 35 degrees.

Algorithm for performing the procedure:

• Before putting on the pump, it is better to lubricate its base with a special lubricant;
• Too greasy a lubricant will make the vacuum pump unusable;
• Place the penis at the base of the pump and press it firmly against the scrotum;
• Before starting the session, you need to lubricate the penis with ointment to increase blood supply;
• Next, air must be pumped out of the pump, thereby increasing the pressure in the pump and creating blood flow to the organ;
• Hold a vacuum cleaner with your left hand and, with the other, use a light bulb to pump air from inside;
• The hole in the bottle should be tight, and if there is a valve, close it;
• During the session, you may notice a slight increase in erection and hyperemia of the penis.After half a minute, you need to open the valve and allow air to enter the bottle;
• The procedure takes approximately 20 minutes.During this period, an erection can occur for a minute about 20 times.

Contraindications

There are a number of illnesses and conditions for which the use of such a device is not recommended.Absolute contraindications include:

1. Diseases of the heart and blood vessels.
2. Thrombosis, atherosclerosis.
3. Varicose veins of the small pelvis.
4. Diseases of an infectious or inflammatory nature.
5. Diseases of the genital (urological) region.
6. The presence of tumor formations of various origins.
7. Childhood or adolescence.
8. Mental disorders.
9. Blood clotting disorder.

In addition, classes are not provided if they cause discomfort or are accompanied by pain.In this case, they will not bring any benefit, but will only harm human health.

There are no other serious contraindications;the device can be used by men of all ages, from 18 to 65 years old.